HYDRAULIC C TYPE POWER PRESS

Product Description

FRAME CONSTRUCTION :

Frame Is Fabricated FromIS-2062 Graded Rolled Steel Plates Table and Cutting Beam Deeply Reinforced andFines

Machines after StressRelieving. The Interlocked Design Put The Direct Support To The Frame. These FramesAre

Strain-Free And EliminateWelds At Load Supports. Thus The Accuracy Of The Machine Is Never Disturbed.

TABLE & SLIDE (RAM) :

Table And Slide Are Made OfHigh Grade Heavy Duty Cast Iron / Steel Fabricated And Properly Seasoned. They Are

Perfectly Aligned, To EachOther To Obtain High Accuracy And Precession Press Operation.

CYLINDER :

The Cylinder Bodies ArePrecisely Made From Forged Steel Material Duly Bored And Fine Honed For LongSealing

Life. The Piston Rods AreMade From EN 8 Material Having Low Carbon Contents. The Piston Rod Is HardChrome

Platted (100 Micron).

HYDRAULIC SYSTEM :

The Compact BlocksEliminate The Leakage Chances And Also Reduces The Hydraulic Pipes. This Low Noise

Hydraulic System Is PlacedOn The Rear Side Of Machine, On Top Between Two Side Plates. Pressure ReliefValue Is

Provided To Safe Guard TheSystem And Machine From Overload. The Hydraulic System Is Driven By An Electric

Motor Of Reputed Brand AndIs Coupled With A Pump Capable Of Generating More Than The Required Pressure.

Pressure Gauge For SystemPressure, Back Pressure And Holding Pressure Are Providing On Top Of Oil TankFor

Quick Reference.

ELECTRICAL CONTROL PANEL :

The Electric Control PanelIs Located On The Left Hand Side Of The Machine. It Is Assembled From The

Internationally ReputedParts For Consistent Performance, Reliability And Availability, If Needed To BeReplaced. It Is

Wired Cleanly AndLabelled/Ferruled Properly As Per The International Practices To Help EasilyLocate Any Fault

And Replace ComponentsConveniently.